Filter
Top Products
Canceling Registration/Re-registration
54
• You can stop registration by pressing [OFF] on the handset and pressing
LOCATOR
[]
,
[]
,
[]
,
[]
or
[] on the base unit.
• If “Wrong handset Refer to manual” is displayed, the handset you tried to
register is not for this base unit. This handset is for KX-TG6500 base unit. The
accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order,
see page 3.
5 Base unit: Press and hold LOCATOR
[]
,
[]
,
[]
,
[]
or
[] for 3
seconds.
• The CHARGE indicator flashes. After the CHARGE indicator starts flashing,
the rest of the procedure must be completed within 1 minute.
6 Handset:
(1) Press the soft key ( ).
(2) Wait until a long beep sounds and the
display shows the new extension number
(ex. extension number 2).
• Registration is complete.
If you have not canceled the handset’s registration at the previous base unit
(p. 52), the handset number remains in that base unit’s memory. To erase the
handset number from the previous base unit, see the base unit’s Operating
Instructions. For the KX-TG5200 or KX-TG5202 base unit: (1) Press and hold
LOCATOR [] until the CHARGE indicator flashes, and (2) Press and hold
LOCATOR [], [], [] or [] for the handset that you do not want until the
CHARGE indicator flashes rapidly. When the indicator stops flashing, the
handset number is erased.