Filter
Top Products
F
Monitoring
30 For assistance, please visit http://www.panasonic.com/phonehelp
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
Note:
LYou can place the handset on the
charger while monitoring using the
speakerphone.
Enabling monitoring access
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
–“Permit”: allows the unit to be
monitored.
–“Deny”: denies access from other units.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Monitor access” i {SELECT}
3 Select the desired setting. (Default:
“Deny”) i {SAVE} i {OFF}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
Monitoring audio in the room
1 {MENU} (center of joystick) i F
i {SELECT}
2 Select the desired unit. i {SELECT}
LYou can listen to the audio.
3 Press {OFF} to stop monitoring.
Note:
LTo start monitoring quickly, press
{INTERCOM}, then press {*} instead
of step 1.
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 30).
THA11.book Page 30 Tuesday, March 7, 2006 5:56 PM