Filter
Top Products
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 15
Registering the handset
Registering the handset
Register the handset to your base unit.
The handset will be assigned an extension
number by your base unit.
Important:
LBefore registering this handset or any
other compatible Panasonic units to
your base unit, we recommend you
change your base unit’s PIN so that
other Bluetooth devices in the area are
not accidentally registered at the same
time. For more information, see the
operating instructions included with your
base unit.
1 Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
LAfter {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
2 Handset:
Press {OK}, then wait until the handset
beeps.
LIf you have changed the base unit’s
PIN, enter it and press {OK}, then
wait until the handset beeps. For
more information, see the operating
instructions included with your base
unit.
Note:
LIf for some reason the handset is not
registered to a base unit, use the
following procedure to register it to the
base unit.
{MENU} (center of joystick) i h i
{SELECT} i “Registration” i
{SELECT} i “Registration” i
{SELECT} i Repeat step 1. i
{OK}
If you have already canceled the
handset’s registration at the previous
base unit, follow steps 1 and 2.
Deregistering the handset
The handset can cancel its own
registration.
1 {MENU} (center of joystick) i h i
{SELECT}
2 “Registration” i {SELECT}
3 “Deregistration” i {SELECT}
4 {3}{3}{5} i {OK}
THA11.book Page 15 Tuesday, March 7, 2006 5:56 PM