Tilt Angle Adjustment
Wall Mounting
The tilt angle of the operation board can be
adjusted to one of four angles.
To lift: Lift up the operation board to the desired
step-angle (1 2 3 4).
To set down: Lift up the operation board to the
highest angle and then press down to
step-angle 1. Be careful not to get your
fingers caught between the base and
the operation board.
4
3
2
1
Pull down the handset hook until it locks to prevent the
handset from slipping down from the operation board when at
step-angle 4.
1 Set the operation board to
step-angle 1.
3 Mount the unit on the wall.
2 Connect the Ethernet cable, and then
attach first and then of the wall
mounting adaptor (included).
4 Pull down the handset hook until it locks,
so the tab holds the handset.
To temporarily place the handset down
during a conversation, hook it over the
top edge of the telephone as shown.
PSQX3298ZA KK0904PY0 (E/GR)
©2004 Panasonic Communications Co., Ltd. All Rights Reserved.
83 mm
