Filter
Top Products
4
• American National Standards Institute (C95.1 – 2005), IEEE
Standard for Safety Levels with Respect to Human Exposure to
Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
•
American National Standards Institute (C95.3 – 2002), IEEE
Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields – RF and Microwave.
•
IEEE Standard 1528-2003.
To ensure that your exposure to RF electromagnetic energy is
within the FCC allowable limits for occupational use, always
adhere to the following guidelines:
•
DO NOT operate the radio without a proper antenna attached,
as this may damage the radio and may also cause you to exceed
FCC RF exposure limits. A proper antenna is the antenna supplied
with this radio by the manufacturer or an antenna specifically
authorized by the manufacturer for use with this radio.
•
DO NOT transmit for more than 50% of total radio use time
(“50% duty cycle”). Transmitting more than 50% of the time
can cause FCC RF exposure compliance requirements to be
exceeded. The radio is transmitting when the “TX indicator”
light is red. You will cause the radio to transmit by pressing the
“PTT” switch.