Filter
Top Products
14
Talking and listening
To communicate, all radios in your group must be set to the same
channel and CTCSS\CDCSS codes.
To talk, press and hold the PTT key. The red TX indicator light
glows continuously when transmitting.
To receive messages, release the PTT key.
For maximum clarity, hold the radio two to three inches away from
your mouth and speak directly into the microphone. Do not cover
the microphone while talking.
Transmit power setting
The radio can transmit at 1 watt or 4 watt. When 1 watt is
selected, will appear on the display. When this icon is off, the
radio will transmit with high power. FCC law dictates, you should
only increase power to 4 watts if your FCC license permits.
Press and hold the SCAN button for 2 seconds to switch
the setting.
Basic Operations