Filter
Top Products
Programmable Settings
For assistance, please call 1-800-211-PANA (7262). 41
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 34
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 35
Interrupt tone {1} {3}{1}: On {2}: 2 times {0}: Off page 35
Message play {2} – page 46
Date and time {4} Go to step 3 on page 16. page 16
Voice enhancer {5}{1}: On {0}: Off page 37
Voice changer
(Talk)
{8} {1}{1}: Deep Voice
{2}: High Voice
{3}: Fun Voice
page 36
Voice changer
(Greeting)
{8} {2}{1}: Deep Voice
{2}: High Voice
{3}: Fun Voice
{0}: Off
page 36
Copy phonebook
(1 item)
*1
{#} {1} Go to step 4 on page 24. page 24
Copy phonebook
(all items)
*1
{#} {2} – page 25
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 37
Key tone {0} {2}{1}: On {0}: Off page 39
Auto talk {0} {3}{1}: On {0}: Off page 36
TG5438_5439.book Page 41 Tuesday, January 11, 2005 4:46 PM