Filter
Top Products
34
Useful Information
For assistance, please visit http://www.panasonic.com/help
Liquid damage
Caution:
≥ To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
The 2nd caller’s information is
not displayed during an outside
call.
≥ In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
While programming or
searching, the unit starts to ring
and stops the program/search.
≥ A call is being received. Answer the call and start
again after hanging up.
The display exits the caller list.
≥ Do not pause for over 60 seconds while
searching.
You cannot redial by pressing
{REDIAL}.
≥ If the last number dialed was more than 32 digits
long, the number will not be redialed correctly.
Information stored in the redial
list is erased.
≥ If “ ” flashes, replace the batteries as soon as
possible. Otherwise, information stored in the
redial list will be erased. Store the desired item in
the phonebook, one-touch dial or speed dial
memory before the battery replacement.
Problem Cause/solution
Liquid or other form of
moisture has entered the unit.
≥ Disconnect the telephone line cord from the unit.
Remove the batteries from the unit and leave to
dry for at least 3 days. After the unit is
completely dry, reconnect the telephone line
cord. Insert the batteries.
Problem Cause/solution
KX-TS880.book Page 34 Friday, October 15, 2010 5:04 PM