Panasonic KXTS880B Telephone User Manual


 
32
Useful Information
For assistance, please visit http://www.panasonic.com/help
Troubleshooting
Problem Cause/solution
The unit does not work.
Check the connections (page 9).
Remove the batteries and reinstall them to reset
the unit.
I cannot hear a dial tone.
Disconnect the unit from the telephone line and
connect the line to a known working telephone. If
the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider/telephone
company.
The unit does not ring.
The RINGER selector is set to OFF. Set to HIGH
or LOW (page 13).
The display is blank.
Install new batteries (page 8).
LCD display response is slow.
Change LCD contrast setting to higher level
(page 21).
Batteries are running low. Install or replace the
batteries.
You cannot dial.
Check the dial tone. If there is no dial tone, check
the connections (page 9).
The dialing mode may be set incorrectly. Change
the settings (page 11).
The dialed number is restricted. To cancel, see
page 22.
The other party suddenly
cannot hear your voice during a
conversation.
{MUTE} may have been pressed during the
conversation.
To cancel, press {MUTE} again (page 14).
You cannot program items such
as the dialing mode.
Programming is not possible when:
s the handset is off the cradle.
s viewing caller information.
s ” is displayed.
s
W” is displayed.
Do not pause for over 60 seconds while
programming.
You cannot make long distance
calls.
Make sure that you have long distance service.
KX-TS880.book Page 32 Friday, October 15, 2010 5:04 PM