Filter
Top Products
Useful Information
9
Other party cannot hear
you.
LThe application software you want to use with
the unit was started before installing the unit.
Please restart the application software.
LThe USB cable is not connected properly to the
unit and your computer. Connect it.
LMake sure that your computer audio device’s
recording volume is set to the maximum.
LIf the status indicator is red, press {T} to turn
the microphone-mute off.
LThe unit may not be selected as the audio
device of your computer. Please confirm the
setting of your computer as follows.
Example: Windows XP
1 Click “start”, then click “Control Panel”.
2 Click “Sounds, Speech, and Audio Devices”.
i Click “Sounds and Audio Devices”. i
Click “Audio” tab.
3 Make sure that the default device of “Sound
recording” is “Panasonic KX-TS710”.
LThe unit may not work properly depending on
the power supply of your computer’s USB port. If
this is the case and your computer has multiple
USB ports, we recommend that you try other
USB ports.
The status indicator is
flashing red.
LUnplug the USB cable from the computer and
the unit, then reconnect it. If the status indicator
is still flashing red, there may be a problem with
the unit. Contact the Panasonic service
personnel.
The status indicator is
OFF.
LMake sure the USB cable is properly connected
to the unit and your computer.
LThe computer is turned off or in suspend mode.
Problem Cause/solution
TS710(e).book Page 9 Friday, March 14, 2008 4:48 PM