Filter
Top Products
Useful Information
8
Troubleshooting
Problem Cause/solution
The speaker/receiver does
not sound.
LThe application software you want to use with
the unit was started before installing the unit.
Please restart the application software.
LThe USB cable is not connected properly to the
unit and your computer. Connect it.
LMake sure that your computer audio device’s
playback volume is set to the maximum and that
mute mode is not selected.
LThe unit may not be selected as the audio
device of your computer. Please confirm the
setting of your computer as follows.
Example: Windows XP
1 Click “start”, then click “Control Panel”.
2 Click “Sounds, Speech, and Audio Devices”.
i Click “Sounds and Audio Devices”. i
Click “Audio” tab.
3 Make sure that the default device of “Sound
playback” is “Panasonic KX-TS710”.
LThe unit may not work properly depending on
the power supply of your computer’s USB port. If
this is the case and your computer has multiple
USB ports, we recommend that you try other
USB ports.
TS710(e).book Page 8 Friday, March 14, 2008 4:48 PM