Filter
Top Products
*8 The flash time depends on your telephone exchange or host PBX. Contact your PBX
su
pplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to
pick up the waiting call.
*9 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
Alarm
A
n
alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
1 MMENUN#720
2 MbN: Select the desired alarm option. a
MSELECTN
“Off” T
urns alarm off. Go to step 7.
“Once” A
n alarm sounds once at the
set time.
“Daily” A
n alarm sounds daily at the
set time. Go to step 4.
3 Enter the desired month and date. a
MO
KN
4 Set the desired time.
5 *: Select “AM” or “PM”. a MOKN
6 MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
7 MSELECTN a MOFFN
Note:
R To stop the alarm, press MOFFN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Silent mode
S
i
lent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
R We recommend turning the base unit ringer
off (page 15) in addition to turning the silent
mode on.
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 MME
NUN#238
2 MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select “AM” or “PM”. a MOKN
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select “AM” or “PM”.
7 MSAVEN a MOFFN
Changing the start and end time
1 MME
NUN#237
2 Continue from step 3 “Turning silent
mode on/off”, page 25.
For assistance, please visit http://www.panasonic.com/help
25
Programming
TGD2xx_(en_en)_1209_ver.040.pdf 25 2013/12/09 10:59:19