Filter
Top Products
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 9
Preparation
Battery installation/
replacement
Important:
LUse only the included rechargeable
batteries noted on page 4, 5.
LWhen replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
LWipe the battery ends (S, T) with a dry
cloth.
LWhen installing the batteries, avoid
touching the battery ends (S, T) or the
unit contacts.
1 Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
LWhen replacing batteries, remove the
old batteries positive (S) end first.
2 Insert the batteries negative (T) end first.
Close the handset cover.
Battery charge
Place the handset on the charger for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
LThe charge indicator lights up when the
handset is placed on the charger.
LThe pictured model is KX-TGA715.
Note:
LThe handset display may show “Please
Wait...” when the handset is placed on
the charger if it is not registered to a base
unit.
LIt is normal for the handset to feel warm
during charging.
LIf you want to use the unit immediately,
charge the batteries for at least 15
minutes.
LClean the charge contacts of the handset,
charger with a soft, dry cloth once a
month, otherwise the batteries may not
charge properly. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
Charge contact
TGA715E_717E(e-e).book Page 9 Wednesday, August 2, 2006 2:46 PM