Filter
Top Products
7
Preparation
Wall mounting
The USB adaptor can be mounted on the
flat surface such as a wall by using the
wall mounting adaptor.
Note:
L�For USB adaptor location information,
see page 4.
1 Peel off the protection sheet and attach
the wall mounting adaptor to the flat
surface firmly.
L�The arrow mark on the wall mounting
adaptor should face upward.
Protection sheet
Arrow mark
2 Insert the hooks on the wall mounting
adaptor into the holes on the USB
adaptor and slide the adaptor down
until it is secure.
Holes
Hooks
Mounting without the wall mounting
adaptor
Drive the screws (not included) into the
flat surface such as a wall using the wall
mount template as a guide, then mount
the USB adaptor securely on the screws.
Screws (not included)
55 mm
55 mm
Wall mount template
KX-TGA595AL(e).indd 7 2006/04/19 21:57:42