Filter
Top Products
– 3 –
7
Base unit/Cordless handset:
Wait until a beep sounds and until
both of the displays show the
assigned handset number.
Press (EXIT).
• The handset number ([1]–[8]) is
displayed in the standby mode.
If a PIN (Personal Identification
Number) has been stored:
Follow steps 1 to 6, and enter the
PIN. Press (ENTER).
Registering Cordless Handsets
Registration is necessary for cordless handsets. A handset will be assigned
the number at registration. The handset number is used as the extension
number (p. 4, 8). You can register up to 8 cordless handsets at the
KX-TG4000B base unit.
Make sure that the base unit and cordless handset are in the standby mode.
Registration must be completed within 1 minute.
Making Calls
Four calls can be handled simultaneously on separate telephone lines by
the base unit and 3 cordless handsets (or by 4 cordless handsets).
1
Press (TALK).
• You can press a line button instead of pressing (TALK).
2
Dial a phone number.
3
To hang up, press (TALK) or place the handset on the charger.
• To adjust the receiver volume, press or while talking.
To dial after confirming the entered number:
Enter a phone number, and press (TALK).
• To redial a number from the redial list (contains the last 10 numbers dialed), press
(REDIAL) until the desired number is displayed, and press (TALK).
1
Base unit:
Press (FUNCTION).
2
Select “Registration” by
pressing or , and press H.
3
Select “HS registration” by
pressing or , and press H.
4
Cordless handset:
Press (FUNCTION).
5
Select “Registration” by
pressing or , and press H.
6
Press H to select “HS
registration”.