Filter
Top Products
Voice Mail Service
34
For assistance, please visit http://www.panasonic.com/help
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “VoiceMail:Line1” and/or
“VoiceMail:Line2” is displayed
on the handset if message indication
service is available.
– The indicator for VOICE MAIL on the
base unit flashes.
1 {MENU} i {#}{3}{3}{0}
2 Press {LINE 1} or {LINE 2} that is
flashing.
L The speakerphone turns on.
3 Follow the pre-recorded
instructions.
4 When finished, press {OFF}.
Note:
L To switch to the receiver, press {C }.
L If the handset or base unit still
indicates there are new messages
even after you have listened to all new
messages, turn it off by pressing and
holding {OFF} until the handset
beeps.
L If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
TG9321(e).book Page 34 Friday, May 28, 2010 4:34 PM