Filter
Top Products
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1 M
N (right soft key)
2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
4 Press MCN or MDN to select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
n Using the direct command code
1 M
N (right soft key) a Enter the desired code.
Example: Press M
N (right soft key) #101.
2 Select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
“Time Settings”
Sub-menu 1 Sub-menu 2 Settings Code
Set Date/Time
*1
– – #101 13
Memo Alarm
1-3: Alarm1-3 1: Once
2: Daily
3: Weekly
0: <Off>
#720 24
Time Adjustment
*1, *2
– 1: Caller ID
0: <Manual>
#226 –
Main menu: “Caller List”
Operation Code
Viewing the caller list. #213 29
Main menu: “Intercom”
Operation Code
Paging the desired unit. #274 32
21
Programming
TG7851TU(en-en)_0718_ver011.pdf 21 2013/07/18 12:00:00