Filter
Top Products
R I
f your cellular phone is in silent mode
with “On (with Talking CID)”
set, the unit announces caller
information even when Talking Caller
ID is turned off (page 43).
To use the handset ringer tone
i
nstead of your cellular phone’s
ringer tone
Select “Off” in step 3, “Ring as cell
mode”, page 20.
To change the handset ringer tone for a
cellular line, see page 41.
Auto connection to the
c
ellular phone
After registration, your cellular phone is
connected to the base unit. If you move
the cellular phone out of base unit
range, the cellular phone is
disconnected from the base unit. This
feature allows the base unit to try to
reconnect the cellular phone at regular
intervals when it returns within base unit
range. You can set the interval. The
default setting is “1 min”.
Important:
R When you are using a cellular line or
a Bluetooth headset, the base unit
loses its connection from other
Bluetooth devices (cellular phone or
headset). To automatically resume
the connection to cellular phones,
leave the auto connection on.
R Some cellular phones lose connection
after usage, please check the
specification of your cellular phone for
more details.
1 MMENUN#632
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
R S
ome cellular phone may ask you if
you accept the connection
requirement from the base unit. In that
case, select “Off” in step 2. Check
the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with
your cellular phone, we recommend
disconnecting it from the base unit,
otherwise received audio may not be
heard on your cellular phone.
You can also manually reconnect the
cellular phone to the base unit without
waiting for the auto connection feature to
resume the connection.
1 MMENUN
2 To connect/disconnect:
For CELL 1: #6251
For CELL 2: #6252
R A long beep sounds.
3 MOFFN
Cellular line only mode (If you
d
o not use the landline)
If you do not use the landline, we
recommend setting the unit to the
cellular line only mode.
1 MMENUN#157
2 To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
R Once you set this mode, you can use
the following buttons to make cellular
calls:
– for the handset, press M
N
or M
N
i
nstead of MCELLN (page 24).
For assistance, please visit http://www.panasonic.com/help
21
Link to Cell