3 To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN: “Yes” a a M N
Note:
R When editing, press the desired dial key to
add,
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
#256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, contact an
authorised service centre.
3 Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “
” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “
”
disappears.
4
5 Select a memory location by pressing 1
to 6. a
6 Enter the phone number or area code to
be restricted (8 digits max.). a
a
M
N
R To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
#132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
a M N
Changing the unit’s region
setting/Resetting the base unit
1
#136
2 MbN: Select the desired country. a
“Other” = countries except Czech and
Slovakia
“Česká rep.” = Czech
“Slovensko” = Slovakia
3 MbN: “Yes” a
a M N
Note:
R The following items will be deleted or reset
to their default settings:
– SMS settings (page 23)
– Time adjustment
– Base unit transmission power
– Privacy mode
– Base unit PIN
– Dial mode
– First ring
– All SMS messages
– Caller list
– Voice mail messages
– Call restrict
R The following items will be retained:
– Display language
– Date and time
– Handset name
– Repeater mode
– Call barred list
R If you select the desired country in step 2,
the following default settings will be
changed for the selected country’s default
settings:
– Recall/flash time (page 24)
– Message centre 1 and 2 (page 23)
– SMS on/off (page 23)
R After changing the unit’s region setting/
resetting the base unit,
is displayed on
28
Programming
TG6711FX(en)_0130_ver002.pdf 28TG6711FX(en)_0130_ver002.pdf 28 2012/01/30 18:56:542012/01/30 18:56:54