Filter
Top Products
Making calls during a power
failure
n When only 1 handset is registered:
1 Lift the handset and dial the phone
number.
2 Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
3 When the other party answers the
call, keep the handset on the base
unit and talk using the speakerphone.
4 When you finish talking, press
M
N.
Note:
R In step 2, if you do not place the handset on
the base unit within 1 minute, the power
back-up mode turns off. In this case, press
M
N on the handset and dial the phone
number. Then try again from step 2.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying power, and use another
handset for making calls. For the
operation, please see “Making calls”,
page 16.
Note:
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
19
Making/Answering Calls
TG6711FX(en)_0130_ver002.pdf 19TG6711FX(en)_0130_ver002.pdf 19 2012/01/30 18:56:542012/01/30 18:56:54