Filter
Top Products
Base unit / Handset
1 9 a MP
AUSEN
2 Dial the phone number.
3 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: M
N
N
ote:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed. Repeat as needed to
create longer pauses.
Answering calls
Using the base unit
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1 Lift the corded handset or press M N
when the
unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press M
N.
Using the handset
When a call is being received, the ringer indicator
f
lashes rapidly.
1 Lift the handset and press M
N
or M
N
when
the unit rings.
R You can also answer the call by pressing
any dial key from 0 to 9, *, or #. (Any
key answer feature)
2 When you finish talking, press MOFFN or place
the handset on the charger.
Auto talk
Y
ou can answer calls simply by lifting the handset
off the charger. You do not need to press M
N.
T
o turn this feature on, see page 23.
Adjusting the ringer volume
Base unit / Handset
n W
hile the unit is ringing for an incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
R B
ase unit:
To turn the ringer off, press and hold MCN
until the unit beeps.
n Programming the volume beforehand:
1 MMENUN#160
2 MbN: Select the desired volume. a MSAVEN
3 Proceed with the operation for your unit.
Base unit: MnN (EXIT)
Handset: MOFFN
Temporary ringer off
Base unit / Handset
W
hile the unit is ringing for a call, you can turn the
ringer off temporarily by pressing M
N.
Useful features during a call
Hold
T
his feature allows you to put an outside call on
hold.
Base unit
1 P
ress MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2 To release hold, lift the corded handset or
press M
N.
R A
handset user can take the call by
pressing M
N.
Handset
1 P
ress MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold, press M
N.
R T
he base unit user can take the call by
lifting the corded handset.
R Another handset user can take the call by
pressing M
N.
N
ote for base unit and handset:
R If a call is kept on hold for more than 9 minutes,
an alarm tone starts to sound and the ringer
indicator on the handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
14
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls