Filter
Top Products
Useful Information
5 Connect the tele )hone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin I_,
use round cut out at the bottom of the
adaptor if you are using the 4 inches
phone plate), then sliding the unit
down to secure it.
Connect the AC adaptor to power
outlet (page 9).
• There are two common types of
wail phone plates. The distance
between _ and I_) may vary
depending on the size of the wall
phone plate installed.
AC adapt
_83rnf_
...........] .........
...... ......
To remove the wall mounting adaptor
While pushing down the release levers
(O), remove the adaptor (_)).
Charger
Available model:
KX-TG6072/KX-TG6073/KX-TG6074
1 Drive the screws (not included) into
the wall.
25.4 mm
2 Mount the charger (O), then slide it
down (1_1)and to the right (O) until it
is secure.
For assistance, please visit http://www.panasonic.com!hetp 41