Filter
Top Products
Programmable Settings
36
Re-registering the handset
If “No link to base. Move closer
to base, try again.” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5822AL only:
Confirm the extension number of the
handset which has lost the
communication by placing the handset
on the base unit or charger.
If you re-register the handset using the
other handset’s extension number [1]
or [2], the other handset will not
function.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5821AL base unit:
Press and hold {HANDSET
LOCATOR} until the CHARGE
indicator flashes.
KX-TG5822AL base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register ({HANDSET
LOCATOR1} or {HANDSET
LOCATOR2}) until the CHARGE
indicator flashes.
LAfter the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5 Handset:
Press {OK}, then wait until the handset
beeps.
LRegistration is complete.
TG5821_5822AL(e).book Page 36 Tuesday, March 15, 2005 8:05 PM