Filter
Top Products
Multi-unit Operation
64 For assistance, please visit http://www.panasonic.com/help
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without pressing
any buttons on the handset.
– listen to the sound in a room where the
handset is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On(Ringer On)”: When an intercom call
is received, the handset rings 2 times then
the speakerphone is automatically turned
on.
“On(Ringer Off)”: When an intercom
call is received, the handset does not ring
and the speakerphone is automatically
turned on. This allows you to easily
monitor a baby’s room, for example, from
different areas of the house.
1 {MENU} (middle soft key) i
{#}{2}{7}{3}
2 Select the desired setting.
3 {SAVE} i {OFF}
Note:
L This feature cannot be used when the
base unit is paging all handsets, or when
receiving a transferred call.
Answering an intercom call using auto
intercom
1 When you are paged by the base unit or
another handset, speak into the
microphone.
L To switch to the receiver, press {C}.
2 To end the intercom, press {OFF}.
Note:
L Auto intercom cannot be used when:
– all handsets are being paged by the
base unit.
– your handset is receiving a transferred
outside call.
Monitoring audio in a room
With a handset or the base unit, you can
listen to the sound in a room where
another handset is located.
Important:
L Before using this feature, set auto
intercom of the destination handset to
“On(Ringer Off)” to allow access by
other handsets.
1 Call the destination handset (page 63).
L You can listen to the audio.
2 To mute your sound output, press
{MUTE} if necessary.
3 Press {OFF} to stop monitoring.
1 Call the destination handset (page 63).
L You can listen to the audio.
2 To mute your sound output, press
{MUTE} if necessary.
3 Press {INTERCOM} to stop monitoring.
Handset
Handset
Handset
Base unit
TG5771_5776_5777.book Page 64 Friday, February 23, 2007 3:52 PM