Filter
Top Products
Making/Answering Calls
28 For assistance, please visit http://www.panasonic.com/help
Using the base unit
1 {SP-PHONE}
2 Speak into the MIC.
3 When you finish talking, press {SP-
PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
L To turn the ringer off, press and hold {V}
until the unit beeps.
L To stop ringing, press {STOP}.
Setting the ringer tone
There are 3 tones and 3 melodies.
1 Press {^} or {V}.
2 Within 10 seconds, press {<} or {>}
repeatedly to select the desired tone.
L To stop ringing, press {STOP}.
Note:
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the base unit’s
ringer tone. If you select a melody, you
cannot distinguish lines by their ringers.
L If you select a melody for the base unit’s
ringer tone, the ringer continues to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected to the same
line.
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
1 Press {HOLD} during an outside call.
L To transfer the call to the base unit or
another handset, continue from step
2, “Transferring calls”, page 65.
2 Press {HOLD} again.
L To release the hold, press {C}.
L The base unit user can take the call
by pressing {SP-PHONE}.
L Another handset user can take the
call by pressing {C}.
Press {HOLD} during an outside call.
L To release the hold, press {SP-
PHONE}.
L Handset users can take the call by
pressing {C}.
Note for handset and base unit:
L While an outside call is on hold, the IN
USE indicator on the base unit flashes.
L If another phone is connected to the
same line (page 15), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call
is disconnected.
Handset
Base unit
TG5771_5776_5777.book Page 28 Friday, February 23, 2007 3:52 PM