Filter
Top Products
Useful Information
64 For assistance, please visit http://www.panasonic.com/phonehelp
Making/answering calls, intercom
Problem Cause/solution
w is displayed, but I
cannot make a call.
L The handset and base unit could not communicate for
some reason, such as interference from other electrical
appliances. Perform the following:
– Move the handset and base unit away from other
electrical appliances.
– Move closer to the base unit.
– Raise the base unit antennas.
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L Move the handset and base unit away from other
electrical appliances.
L Move closer to the base unit.
L Raise the base unit antennas.
L Turn on the clarity booster feature (page 27).
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset and base
unit do not ring.
L The ringer volume is turned off. Adjust it (page 26, 45).
I cannot make a call. L The dialing mode may be set incorrectly. Change the
setting (page 23).
L The base unit or another handset is in use. Try again
later.
I cannot redial by
pressing {REDIAL}.
L If the last number dialed was more than 48 digits long,
the number will not be redialed correctly. Dial the
number manually.
I cannot have a
conversation using the
headset.
L Make sure that an optional headset is connected
properly (page 60).
I cannot make long
distance calls.
L Make sure that you have long distance service.
I cannot page the
handset or base unit.
L The called handset is too far from the base unit.
L The called unit is in use. Try again later.
I cannot turn the clarity
booster on.
L Another handset is already using this feature.
TG5761_5766_5767.book Page 64 Thursday, April 13, 2006 6:01 PM