Panasonic KX-TG5664 Answering Machine User Manual


 
Base Unit Speed Dialer
26 For assistance, please visit http://www.panasonic.com/phonehelp
Base unit speed dialer
You can assign one phone number to each
of the 10 dial keys ({0}
{9}) on the base
unit.
Adding phone numbers to the
speed dialer
Important:
L Before storing phone numbers, make
sure the base unit is not being used.
1 {PROGRAM}
2 Enter the phone number (max. 32
digits).
L If a pause is required for dialing,
press {PAUSE} where needed.
L If you misdial, press {STOP} and
repeat from step 1.
3 {PROGRAM}
4 Press a dial key ({0} {9}).
Note:
L If a phone number is stored in a dial key
which already contains a phone number,
the old number will be erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
In step 2, press {9}, {PAUSE}, then enter
the phone number.
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses. “P
is displayed when {PAUSE} is pressed.
L When {*} is pressed, “$” is displayed.
When {#} is pressed, “#” is displayed.
To erase a stored phone number
1 Press {PROGRAM} 2 times.
2 Press the desired dial key ({0} {9}).
Calling someone with the speed
dialer
1 {SP-PHONE} i {AUTO}
2 Press the desired dial key ({0} {9}).
Note:
L Speed dial numbers stored in the base
unit can only be dialed from the base
unit.
TG5664(e).book Page 26 Monday, March 6, 2006 11:15 AM