Filter
Top Products
Programmable Settings
For assistance, please call 1-800-211-PANA (7262). 37
Ringer settings
Handset ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Ringer volume” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired volume.
LTo turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5 Press {Save}.
Note:
LWhen the ringer volume is set to off, the
handset will display “Ringer off”, and
will not ring for outside calls. The
handset will ring at the low level for
intercom calls.
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies. The default
setting is “Tone 1”.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Ringer tone” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired setting.
LYou can also select the ringer tone by
pressing {1} to {7}.
LIf the ringer volume has been turned
off, the handset will not ring.
5 Press {Save}, then press {OFF}.
Note:
LIf you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
LIf you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
Ringer setting
Ringer volume
Ringer volume
Low
||||||
High
K
Back
dB
Save
L
Ringer setting
Ringer tone
Ringer tone
1=Tone 1
K
Back
dB
Save
L
TG5431_5432_5433(e).book Page 37 Friday, January 14, 2005 4:11 PM