Filter
Top Products
Programmable Settings
36 For assistance, please call 1-800-211-PANA (7262).
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 31
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 31
VM access {3} Go to step 2 on page 29. page 29
Voice enhancer {5}{1}: On {0}: Off page 32
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 33
Key tone {0} {2}{1}: On {0}: Off page 34
Auto talk {0} {3}{1}: On {0}: Off page 32
Caller ID number auto
edit
{0} {4}{1}: On {0}: Off page 32
Set dial mode {0} {5} {1}{1}: Pulse {2}: Tone page 33
Set flash time {0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 33
Set line mode {0} {5} {3}{1}: A {2}: B page 34
Store VM access# {0}{7}{1} Go to step 5 on page 28. page 28
VM tone detect {0}{7}{2}{1}: On {0}: Off page 28
Change language {0} {8}{1}: English {2}: Spanish page 33
Message alert {0} {#} {1}: On {0}: Off page 29
Handset registration {0} {0} Go to step 4 on page 35. page 35
TG5428.book Page 36 Monday, June 6, 2005 2:26 PM