Filter
Top Products
Programmable Settings
For assistance, please call 1-800-211-PANA (7262). 35
Re-registering the handset
If “No link to base. Move closer
to base, try again.” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 Base unit:
Press and hold {HANDSET
LOCATOR} until the CHARGE
indicator flashes.
LAfter the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5 Handset:
Press {OK}, then wait until the handset
beeps.
LRegistration is complete.
Customer support
The handset can display the Internet
address where you can download
operating instructions for this product
using your computer.
1 Press {MENU}.
2 Scroll to “Customer support” by
pressing {V} or {^}, then press {>}.
L“www.panasonic.com/support”
will be displayed.
3 Press {OFF}.
TG5428.book Page 35 Monday, June 6, 2005 2:26 PM