Filter
Top Products
Intercom
I
ntercom calls can be made:
– between the base unit and a handset
– between handsets
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, you hear 2 tones.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
MSP-PHONEN 2 times.
– To answer the call with the handset, press
MOFFN, then press M
N.
Making an intercom call
Base unit
1 P
ress MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
R To stop paging, press MINTERCOMN.
2 When you finish talking, press MINTERCOMN
or place the corded handset on the cradle.
Handset
1 MM
ENUN a MINTN
2 MbN: Select the desired unit. a MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press MOFFN.
Answering an intercom call
Base unit
1 L
ift the corded handset or press MINTERCOMN
to answer the page.
2 When you finish talking, place the corded
handset on the cradle or press MINTERCOMN.
Handset
1 P
ress M
N
to answer the page.
2 When you finish talking, press MOFFN.
Handset locator
Y
ou can locate a misplaced handset by paging it.
1 Base unit: Press MLOCATORN.
R All registered handsets beep for 1 minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N,
then press MOFFN.
Transferring calls,
c
onference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between the base unit and a handset
– between 2 handsets
Base unit
1 D
uring an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside call.
3 To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference, press
MCONFN.
Handset
1 D
uring an outside call, press MINTN to put the
call on hold.
2 MbN: Select the desired unit. a MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not answer, press
M
N
to return to the outside call.
38
For assistance, please visit http://www.panasonic.com/help
Intercom/Locator
TG477x(en-en)_1130_ver021.pdf 38 2011/11/30 15:57:56