Filter
Top Products
Error messages
Display message Cause/solution
Base no power
o
r
No link. Re-connect base
AC adaptor.
R T
he handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 31).
Busy
R T
he called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for
y
our access #
R Y
ou have not stored the voice mail access number.
Store the number (page 41).
Check tel line
R T
he supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 11).
Error!!
R R
ecording was too short. Try again.
Invalid
R T
here is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 31).
Requires subscription to
C
aller ID.
R You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
Use rechargeable battery.
R A
wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 5, 8.
For assistance, please visit http://www.panasonic.com/help
47
Useful Information
TG47xx(en-en)_1118_ver022.pdf 47 2011/11/18 10:26:19