Filter
Top Products
Intercom/Locator
38
have a conference call with an outside
party.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 Proceed with the operation for your
model.
■ KX-TG4382/KX-TG4392
Press the right soft key.
■ KX-TG4393/KX-TG4394
{V}/{^}: Select the desired unit.
i {Transfer}
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
4 To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the destination unit.
To establish a conference call:
Press {Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
Answering a transferred call
Press {C} to answer the page.
Note:
L After the paging party disconnects,
you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit:
{LOCATOR}
L The handset beeps for 1 minute.
2 To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
■ KX-TG4381/KX-TG4382
Press {OFF}.
■ KX-TG4391/KX-TG4392/
KX-TG4393/KX-TG4394
Press {INTERCOM}, then press
{OFF}.
Note:
L When the ringer volume for outside
calls is set to off (page 23), the
handset rings at a low level for paging.
TG43xxAL(e)_OI.book Page 38 Friday, May 23, 2008 3:51 PM