Panasonic KXTG4021N Telephone User Manual


 
Answering System
28
For assistance, please visit http://www.panasonic.com/help
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
your own greeting message
a pre-recorded greeting message
Recording your greeting
message
1
{MENU}
2 {V}/{^}: Answering device
i {OK}
3 {V}/{^}: Greeting i {OK}
4 {V}/{^}: Record greeting i
{OK}
5 {V}/{^}: Yes i {OK}
6 After a beep sounds, hold the
handset about 20 cm (8 inches)
away and speak clearly into the
microphone (2 minutes max.).
7 Press {OK} to stop recording.
8 {OFF}
Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a pre-
recorded greeting asking callers to leave
a message.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1 {MENU}
2 {V}/{^}: Answering device
i {OK}
3 {V}/{^}: Greeting i {OK}
4 {V}/{^}: Pre-recorded i
{OK}
5 {OK} i {OFF}
Playing back the greeting
message
1
{MENU}
2 {V}/{^}: Answering device
i {OK}
3 {V}/{^}: Greeting i {OK}
4 {V}/{^}: Check greeting i
{OK}
5 {OFF}
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Operating the answering
system during playback
Key Operation
{^} or {V} Adjust the speaker
volume
{7} Repeat message
*1
{8} Skip message
{} (STOP) Stop playback
{ERASE} Erase currently
playing message
TG401x.book Page 28 Wednesday, December 23, 2009 9:30 AM