Filter
Top Products
Getting Started
11
Display
Handset display items
*1 Voice mail subscribers only
*2 Caller ID subscribers only
*3 KX-TG3412
Initial settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {j/OK}
2 {r}: “Settings” s {j/OK}
3 {r}: “Set tel line” s {j/OK}
4 {r}: “Dial mode” s {j/OK}
5 {r}: Select the desired setting.
6 {j/OK} s {OFF}
Date and time
1 {j/OK}
2 {r}: “Date & time” s {j/OK}
3 Enter the current date, month, and year
by selecting 2 digits for each. s {j/OK}
Example: 15 July, 2011
15 )7 11
4 Enter the current hour and minute (24-
hour clock format) by selecting 2 digits for
each.
Example: 15:30
15 3)
5 {j/OK} s {OFF}
Note:
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Item Meaning
w Within base unit range
L When flashing: Handset is
searching for the base
unit. (page 23)
C Handset is on an outside call.
L When flashing slowly:
The call is put on hold.
L When flashing rapidly:
An incoming call is now
being received.
0 New voice mail message
received.
*1
(page 20)
T Ringer volume is off. (page
16)
k Phonebook is opened.
y L There are missed calls.
*2
(page 18)
L Displayed when searching
the caller list. (page 18)
5 Battery level
[P] Call sharing mode is off.
*3
(page 16)
In use Someone is using the line.
Symbol meaning:
Example: {r}: “Off”
Press {V} or {^} to select the words in
quotations.
TG341xBX(e).book Page 11 Thursday, March 3, 2011 1:47 PM