Filter
Top Products
Registering a handset to the base unit
1 Handset:
M N
2 MbN: “Handset Setup” a M N
3 MbN: “Register H.set” a M
N
4 Base unit:
Press and hold M
N for about 5 seconds. (No registration tone)
R If all registered handsets start ringing, press M
N again to stop, then repeat this step.
(KX-TG2712)
R The next step must be completed within 90 seconds.
5 Handset:
Wait until “Enter Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a M
N
R If you forget your PIN, contact an authorised service centre.
R When the handset has been registered successfully,
stops flashing.
Deregistering a handset
1 M
N
2 MbN: “Base Unit Setup” a M
N
3 335 a M
N
R All handsets registered to the base unit are displayed.
4 Enter the desired handset number you want to cancel. a M N
5 MbN: “Yes” a M
N
R A confirmation tone sounds.
R The handset does not beep when cancelling its own registration.
6 M
N
Changing the base unit PIN (Personal Identification Number)
Important:
R If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
you. If you forget your PIN, contact an authorised service centre.
1 M
N
2 MbN: “Base Unit Setup” a M
N
3 MbN: “Base Unit PIN” a M N
4 Enter the current 4-digit base unit PIN (default: “0000”).
5 Enter the new 4-digit base unit PIN. a M
N a M N
31
Useful Information
TG271xFX(en-en)_0919_ver011.pdf 31 2012/09/19 15:02:01