Filter
Top Products
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 M
N
2 MbN: “Base Unit Setup” a M
N
3 MbN: “Repeater Mode” a M N
4 MbN: Select the desired setting. a
M
N a M N
Note:
R After turning the repeater mode on or off,
may flash on the handset momentarily.
This is normal and the handset can be used
once
stops flashing.
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Press and hold M N for about 5 seconds.
(No registration tone)
R The next step must be completed
within 90 seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and indicator light
green.
3 Base unit:
To exit the registration mode, press M N.
21
Programming
TG271xFX(en-en)_0919_ver011.pdf 21 2012/09/19 15:02:00