Panasonic KX-TG2632AL Answering Machine User Manual


 
Useful Information
48
Phonebook
*1 KX-TG2632
Caller ID
*1 KX-TG2632
Answering system
Problem Cause/solution
Copying stopped with an
item displayed.
*1
L The destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s}.
The displayed phonebook item was not copied to the
unit. Press {OFF}. Confirm that the destination unit is
not in use and try again.
Problem Cause/solution
The handset does not
display the caller’s phone
number.
L You have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
L If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless
telephone jack, disconnect the unit from the equipment
and plug the unit directly into the wall jack.
L If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the base unit and the telephone line socket.
Contact your ADSL provider for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 25).
L If a call is being transferred to you, the caller information
is not displayed.
*1
Problem Cause/solution
I cannot listen to
messages from a remote
location.
L A touch tone phone is required for remote operation.
L Enter the remote code correctly (page 35).
L The answering system is off. Turn it on (page 36).
TG2631AL_2632AL.book Page 48 Monday, February 20, 2006 2:54 PM