Filter
Top Products
Useful Information
44
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy L The called base unit is in use.
L Another handset or the called handset is in use.
*1
L The handset you tried to copy phonebook items to is in
use.
*1
L The handset you are calling is too far from the base
unit.
*1
Dial locked L Dial lock is turned on. To turn it off, see page 20.
Error!! L The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L Another handset user tried to send phonebook items to
you but there was an error. Have the other handset user
re-send the items to you (page 24).
*1
L The entered password was wrong in programming dial
lock. Enter the correct password.
---Incomplete---
Phonebook full
L The destination unit’s phonebook memory is full. Erase
unnecessary items from the destination unit’s
phonebook (page 23).
*1
Invalid L There is no handset registered to the base unit
matching the extension number you entered.
*1
No items stored L Your phonebook or redial list is empty.
No link to base.
Move closer to
base, try again.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset’s registration may have been cancelled.
Re-register the handset (page 40).
Phonebook full L There is no space to store new items in the phonebook.
Erase unnecessary items (page 23).
Please lift up and
try again.
L A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
TG2631AL_2632AL.book Page 44 Monday, February 20, 2006 2:54 PM