Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 43
Wall mounting
Base unit
Connect the telephone line cord. Mount
the unit by inserting the mounting pins into
the round openings on the adaptor (for pin
2, use round cut out at the bottom of the
adaptor if you are using the 4 inches
phone plate), then sliding the unit down to
secure it.
Connect the AC adaptor to power outlet
(page 10).
L There are two common types of wall
phone plates. The distance between 1
and 2 may vary depending on the size
of the wall phone plate installed.
Charger
1 Drive the screws (not included) into the
wall using the wall template as a guide.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it is
secure.
83 mm
(
3
1
/
4
inches
)
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
or
102 mm
(4 inches)
1
2
1
2
Available model:
KX-TG2632
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
25.4 mm
(1 inch)
TG2631_2632.book Page 43 Monday, December 26, 2005 2:02 PM