Filter
Top Products
Programming
32 For assistance, please visit http://www.panasonic.com/phonehelp
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*2 KX-TG2632
*3 This tone lets you know when you receive a call while you are on an intercom call. If you
select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the
tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*6 The flash time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary. The setting should stay at “700ms” unless pressing {Flash} fails
to pick up the call waiting call.
*7 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*8 This feature allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
Ring count {0}{6}{1}{2}–{7}: 2–7 rings <4>
{0}: Toll saver
r
Ringer tone (Handset)
*5
{1}{2}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
–
Ringer volume (Handset) {1}{1}{1}: Low {2}: Medium
{3}: <High> {0}: Off
–
Set dial mode {0}{5}{1}{1}: Pulse {2}: <Tone>
(page 17)
r
Set flash time
*6
{0}{5}{2}{1}: <700ms> {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
r
Set line mode
*7
{0}{5}{3}{1}: A {2}: <B> r
Time adjustment
*8
(Caller ID subscribers only)
{0}{9}{1}: <Caller ID[auto]>
{0}: Manual
r
Voice enhancer {5}{1}: On {0}: <Off>–
Feature Feature
code
Setting code System
setting
TG2631_2632.book Page 32 Monday, December 26, 2005 2:02 PM