Filter
Top Products
H
Save DIRECT#
Recall time
Set line mode
Talk switching
H
Save directory
Ringer volume
Program
LCD contrast
14
Programmable Functions
You can program the following functions by using the handset near the
base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the handset is in the standby mode initially.
During programming:
*To select a desired function item, press Ö or Ñ repeatedly until the
arrow points to the item. Then press FWD/EDIT á to go to the next step.
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try again.” is displayed.
<Function menu>*
To store an item in the directory (p. 32).
To select the ringer volume (p. 16).
To select the LCD contrast (p. 17).
Press FWD/EDIT á.
To store a phone number in the DIRECT
button (p. 30).
To select the recall time (p. 42).
To select the line mode (p. 13).
To set the auto talk feature (p. 15).
<Function menu>*
Lift the handset, and press (FUNCTION/EXIT/CH).