Panasonic KX-TG2431NZ Telephone User Manual


 
Useful Information
54
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
*1 KX-TG2432NZ only
Display message Cause & solution
Busy L The called handset is in use.
*1
L The handset you tried to copy phonebook items to is in
use.
*1
L The handset you are calling is too far from the base unit.
*1
Error!! L When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the handset
and the base unit away from the electrical appliances and
try again.
L The other handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 26).
*1
L The entered password was wrong in programming dial
lock. Enter the correct password.
---Incomplete---
Phonebook full
L When the phonebook item(s) was(were) sent to another
handset, the handset’s phonebook memory was full and
copying stopped. Press {OFF} to exit. Erase items from
the other handset’s phonebook (page 25). When
phonebook memory is available, you can copy all
phonebook items (page 26) or individual items one by one
(page 26).
*1
No link to base.
Move closer to
base, try again.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antenna.
L The handset’s registration may have been cancelled. Re-
register the handset (page 38).
Phonebook full L There is no space to store new items in the phonebook.
Erase unnecessary items (page 25).
No items stored L Your phonebook or redial list is empty.
Please lift up
and try again.
L A handset button was pressed while the handset was on
the base unit or charger. Lift the handset and press the
button again.
System is busy.
Please try again
later.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
L More than one unit is in use. Try again later.
*1
L Another user is listening to messages. Try again later.
Dial locked L Dial lock is turned on. To turn it off, see page 38.