Filter
Top Products
46
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery • The battery needs to be charged. Recharge the
battery (p. 9).
Charge for 6h • The battery has been discharged. The handset will
not work. Fully charge the battery (p. 9).
No link to base.
Move closer to
base, try again.
• The handset has lost communication with the base
unit. Walk closer to the base unit and try again or
re-register the handset (p. 40).
• Confirm the base unit’s AC adaptor is plugged in.
• Raise the base unit antenna.
Please lift up
and try again.
• A handset button was pressed while the handset
was on the base unit. Lift the handset and press the
button again.
Error!! • When you tried to re-register the handset, the
handset and base unit could not link for some
reason, such as interference from electrical
appliances. Move the handset and base unit away
from any electrical appliances and try again.
Phone book full • When you tried to store an item in the phone book,
the phone book memory was full. Press [OFF] to exit
the programming mode. To erase other items from
the phone book, see page 33.
System is busy.
Please try again
later.
• The handset has lost communication with the base
unit. Walk closer to the base unit and try again.
Line in use • A parallel connected telephone is in use.
Store VM access# • You have not stored the voice mail access number.
Store the number (p. 34).
PQQX13982YA.book Page 46 Friday, January 23, 2004 10:02 AM