Filter
Top Products
For assistance, please call: 1-800-211-PANA(7262)
37
Special Features
Advanced Operation
For Call Waiting Service Users
Press [FLASH/CALL WAIT] if you hear a call waiting tone during a conversation.
• The first call is put on hold and you can answer the second call.
• To return to th e first caller, press [FLASH/CALL WAIT] again.
• Call Waiting service cannot be used when the first call is put on hold.
• If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID display
If you subscribe to both Caller ID and Call Waiting with
Caller ID services (CWID), when a second call is received
while talking, the second caller’s information will be
displayed. After you hear a call waiting tone while talking, the display shows the
caller’s name with the phone number and “----Waiting-----”.
• Cont act your telephone company for details about availability in your area, and to
verify that CWID service is activa ted on your telephone line.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• P ressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the
mute (p. 36).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Set flash time” by pressing [
d
]
or [
B
], then press Select.
5 Select the desired time by pressin g [
d
] or [
B
].
6 Press Save, then press [OFF].
Handset
BROWN,NANCY
1-555-666-7777
----Waiting-----
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set flash time
Back Select
K
d
BL
Set flash time
:700ms
Back Save
K
d
BL