Filter
Top Products
36
Special Features
Handset Locator
You can locate the handset or page the handset user with beep tones from the base
unit.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [*] (TONE) before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the dialing
mode will return to pulse.
Muting Your Conversation
During a call, you can mute your phone so the other party cannot listen to you.
When muting your conversatio n, you can hear the other party.
Press Mute.
•“Mute” will flash.
• To release the mute, press Mute again.
• If you press [C] or [s] to switch between the receiver
and speaker, the mute will be released.
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press Pause or P if a pause is
required for dial with a PBX or to make a long distance call.
Ex. Line access number [9] (PBX)
[9] N Pause or P N
• Pressing Pause or P once creates a 3.5 second pause.
This prevents misdialing when you dial after confirming
the entered number (p. 18) or dial a stored numbe r (p. 30, 31).
• Pressing Pause or P more than once increases the length of the pause between
numbers.
1 Press [HANDSET LOCATOR].
• The IN USE indicator flashes rapidly.
• The paged handset be eps for 1 minute and displays “Call from Base”.
2 To stop paging,
Base unit: Press [HANDSET LOCATOR] again.
OR
Handset: Press [OFF].
• You can also stop paging by pressing any button except [
d
] or [
B
].
Base Unit
Handset
Handset
Talk
00-00-30
(VE) Mute
K
L
40
Handset
OR
Example
9P15556667777
|
Clear Pause
K
L
9P15551234567
|
=Next P
K
fd
L
Phone number
PQQX13981YA.book Page 36 Friday, January 23, 2004 9:53 AM