Filter
Top Products
Preparation
7
Base unit
A Charge contact
B {x} (Page)
C Ringer
Displays
Display icons
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a BT double adaptor.
L The unit is not designed to be used with
rotary (pulse dialling) services.
Display
icon
Meaning
w Within range of a base unit
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit
settings, etc.)
k Handset is on an outside
call.
5 Battery strength
[2] Handset number (Standby
display setting, page 15)
0 New call minder message
received (page 20)
Line is being used by
another handset.
A
B
C
(220–240 V, 50 Hz)
To telephone
network
Hook
Use only the included
AC adaptor and
telephone line cord.
TG1831NZ(e-e).book Page 7 Thursday, June 1, 2006 4:34 PM