Filter
Top Products
3.3 Installation of the KX-TDA Maintenance Console
162 Installation Manual
Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and connect
to the Hybrid IP-PBX for the first time after initialization (with the factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will set up the basic items. For details about the basic items,
refer to "2.3.3 Quick Setup" in the Feature Guide.
1. Connect the PC to the Hybrid IP-PBX with a USB cable.
2. Start the KX-TDA Maintenance Console from the Start
menu.
3. "Information Before Programming" appears.
a. Carefully read this important additional information,
which includes updates to this and other manuals.
b. Click [OK] to close this window.
4. Enter the Installer Level Programmer Code (default:
INSTALLER), then click [OK].
The Programmer Code authorizes different programming
levels, and the Quick Setup is only available when you start
the KX-TDA Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorization: Administrator Level (default: ADMIN),
and User Level (default: USER).
5. Click "Connect" → "USB" from the menu bar.
6. Enter the system password for installer (default: 1234),
then click [OK] to log-in.