Filter
Top Products
3.3 Installation of the KX-TDA Maintenance Console
Installation Manual 161
3.3 Installation of the KX-TDA Maintenance
Console
3.3.1 Installing and Starting the KX-TDA Maintenance Console
System Requirements
Required Operating System
• Microsoft® Windows® 98 SE, Windows Me, Windows 2000, or Windows XP
Minimum Hardware Requirements
• CPU: 133 MHz Intel® Pentium® microprocessor
• HDD: 100 MB of available hard disk space
• RAM: 64 MB of available RAM (128 MB recommended)
Installing the KX-TDA Maintenance Console
Notes
• Make sure to install and use the latest version of the KX-TDA Maintenance Console.
• To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP
Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.
• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed. Follow
the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first
connected to the PC via USB, you may be asked to select the appropriate USB driver. Browse for
and select the KX-TDA USB driver that was installed previously.
1. Copy the setup file of the KX-TDA Maintenance Console to
your PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.