Panasonic KX-TCD951EB Telephone User Manual


 
20
Setting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is
cancelled.
When the unit is in the stand-by mode, press and hold
until a beep sounds.
” is displayed and all dialling buttons are locked.
To cancel the key lock
When the unit is in the stand-by mode, press and hold for about 2 seconds.
” will disappear and the key lock will be cancelled.
The key lock will also be cancelled when the power is turned OFF (p. 12).
PROG
PROG
Special Features
1 Press .
The in use indicator ( ) flashes on the base unit.
The handset rings for 1 minute and “ ” flashes.
The base unit is displayed as “
[0]
”.
Handset Locator
From the base unit, you can locate the handset or page a person at the handset with ring tones.
2 To stop paging, press again or press on the handset.
Handset 1 display
[ i ] - [ 0 ]
Temporary Tone Dialling
(For Rotary or Pulse Service Users)
Press before entering access numbers which require tone dialling.
The dialling mode changes to tone.You can enter numbers to access an answering service,
electronic banking service, etc. When you hang up, the mode will return to pulse.
KX-TCD951EB(016~021) 99.6.16 7:09 PM Page 20